-
The “Gas Trap” Garand
Newer M1 Garand rifle collectors may not be aware that the U.S. Rifle, Cal. .30 M1 with which we are all familiar featured a very different type of gas system when it was adopted in 1936. The collector term standardized by the Garand Collectors Association (GCA) in 1993 for the first type of gas system was Gas Trap that utilized a false muzzle to deflect or “trap” the gas into the gas cylinder. The early barrel was threaded at the muzzle and the gas cylinder screwed onto it. The gas plug slipped down into the front of the cylinder and was held in place by a screw. The barrel had…
-
BOOK REVIEW: A Collectors Guide to the Colt AR-15 SP1 Sporter Rifle
I have long been a fan of the Colt AR-15 SP1 Sporter Rifle. When I bought my Colt SP1 in 1982 you had two choices in the purchase of the AR-15, a Colt SP1 Sporter rifle or a Colt SP1 Sporter Carbine. That was it as there were no other makers. I chose the rifle. The price was $500. I shot my SP1 a lot back in the day and used that rifle to compete in early IPSC 3-gun matches. It remains one of my favorite rifles; it is accurate, light weight, and easy to shoot. One of my gun regrets is that I didn’t buy a Colt SP1 Sporter…
-
My Favorite World War I U.S. Small Arms – 1917 Rifle (Part 3/3)
This blog post is the last of three about my favorite World War I U.S small arms. When America entered World War I in April 1917 it was ill prepared in arms and equipment with which to fight in a world war. As it took many months for US troops to train and travel to Europe and to enter combat, weapons manufactured in 1918 have been the focus of my collecting. Surprising to some, the M1903 rifle was not the predominant rifle carried by U.S. troops in World War I. That rifle actually was the United States Rifle Model of 1917, often erroneously referred to as the M1917 Enfield or…
-
My Favorite World War I U.S. Small Arms – 1903 Rifle (Part 2/3)
This blog post is the second of three about my favorite World War I U.S small arms. America declared war on Germany on April 6, 1917. It took many months for US troops to reach Europe and to enter combat. The primary period of time for Americans in combat in World War I was in 1918, therefore weapons manufactured in 1918 have been the focus of my collecting. From adoption in 1903 through early 1917, Springfield Armory was the only continuous maker of the M1903. Rock Island Arsenal had also manufactured M1903 rifles, but only from 1904 through 1913. Production at Springfield Army was at only a moderate rate. By…
-
My Favorite World War I U.S. Small Arms – M1911 Pistol (Part 1/3)
This post is the first of three about my favorite World War I U.S arms. My first collectible US martial arm purchase in the early 1980s was a Colt M1911 pistol manufactured in 1918. It had been carried by a friend’s grandfather during World War I. Sadly I had to sell that one to help pay for a divorce. I wish I had it back. The War to End all Wars (World War I) began in Europe in 1914. America remained neutral until April 6, 1917 when we declared war on Germany. It took many months for US troops to reach Europe and to enter combat. Because 1918 was the…
-
Smith & Wesson Model 10 Heavy Barrel
This week’s Thursday day at the Range included a double action revisit of a true classic: a Smith & Wesson Model 10 Heavy Barrel. Pretty ordinary, you’d say; pretty common, you’d say. Ah, but you might not think so if you noticed the cartouche that’s partially covered by the grip: CPD in a circle. “CPD” refers to “Cleveland Police Department, of Cleveland, Ohio. The third picture shows what I call the “library card,” the property record for this revolver. When the CPD began to rearm with semiautomatic pistols, Officer James Scully purchased the revolver in 1982. The revolver was fitted with Mershon grips during its service with the CPD. Mershon…
-
Double Action Revolver
This Thursday Day at the Range continues our double action revolver action, this time with a pre-WWII square-butt S&W Military and Police, fourth change. With a serial number in the 550,000 range. it likely dates to the late ’20s or early ’30s. This is one of those guns that has seen a lot of outside wear and abuse, but hasn’t been shot very much. The action is as smooth as silk, just as would be expected from a classic “Model 10.” The counterpoint to that sweet trigger is, of course, the vestigial sights. It should be no surprise that I’m a dyed-in-the-wool 1911 guy; but classic Smiths, particularly K frames,…
-
Ruger Super GP100
This time Thursday Day at the Range continues the double-action revolver series with more DA action. My focus for over six decades has been single action automatic pistols, specifically M1911s. Oh, sure, I dabbled in single-action revolvers such as the Ruger Single-Six, and at one point had an S&W Model 38 and a Walther P38. But, I didn’t shoot them much. This series of Thursday Days is intended to remedy my double-action deficiency. Last time we ran a Ruger Wiley Clapp GP100 with a 3″ barrel. This time, it’s another Ruger, a Super GP100. The Super GP is essentially a Super Redhawk with an eight-shot .357 Magnum cylinder and a…
-
Ruger GP100
This Thursday Day at the Range included the first revolver we’ve run in some time. We’ve had a long string of autopistols, thus I think it’s time to switch things up with a little wheel-gun action. This week’s subject is a Wiley Clapp special edition 3″ Ruger GP100. The GP100 is Ruger’s heavy-duty medium frame .357 Magnum revolver. It replaced the much-loved Security-Six in much the way that S&W supplanted their K-Frames with the slightly stronger L-Frames. Wiley Clapp, a long-respected handgunner, has been retained as a consultant by Ruger (and Colt) to recommend product enhancements. In the case of the GP100, a fiber optic front sight and Novak-style rear…
You May Also Like
Ruger 10/22 – Ch. 4 Assembly – Intro
My Favorite Ruger 10/22
You Can Go Home Again
-
Ruger BSR9
Today’s Thursday Day at the Range was, shall we say, both interesting and a bit humbling. After posting the “Five Best” 1911 targets below, this week’s targets weren’t nearly so impressive. That’s the humbling part. The interesting part is the contrast between this Ruger BSR9 (“B” for black slide) and the SR9 from a few weeks ago. The recent SR9 shoot was somewhat disconcerting because the front sight decided to attempt a walkabout. Needless to say, the accuracy results were somewhat compromised by a sight attempting to escape its dovetail. While contemplating a remedy for that pistol, which has a stainless bare finish slide, I decided to break out another SR9,…
